• RV
    • Missy – My Home
    • JBAM – Newmar Dutch Star
    • Shaneeda
    • Buying a Used RV
    • Gas vs Diesel RVs
    • Ideal Motorhome
    • Choosing the Ideal RV
  • Cycling
  • Jeep
  • About
  • Flying
    • Vans RV-4
    • Daisy – RV-3B
  • Resources
  • Subscribe

JdFinley.com

Fulltime RV Living Adventures

  • Is Solar For You?
  • Gas vs Diesel RVs
  • Buying a Used RV
  • Choosing the Ideal RV
  • Ideal Motorhome

Chainsaw Review: Sportsman 20 in. 52cc

October 26, 2024

I’m doing a lot of woodturning these days – bowls and such and that means I’m messing with a lot of timber/logs so I found myself in need of a chainsaw for preparing logs. Being a “bargain hunter”, I looked for a less expensive option than the name brand saws. At the time, Tractor Supply had an online sale for the Sportsman 20 in. 52cc Chainsaw (SKU:1722047) – only $99.00. Wow – said I!

The reviews for this Chinese manufactured saw are terrible – mostly due to starting difficulties. I figured I was smarter than a chainsaw – I know – that is a very dangerous bet!! I couldn’t turn down such a sweet deal when “similar” sized saws from the name brand manufacturers were going for nearly $500.

I ordered, it arrived. It looked like a reasonable piece of equipment – though certainly not “fancy” or “stylish”. Thankfully, I don’t think a “fast looking” chainsaw really matters. Mine started pretty easily and I put it to work around my shop for a few minutes. No issues.

A few days later, I took it on a timber harvesting trip into the mountains. Things started off just fine but within an hour or two the saw was becoming difficult to start.

I was at pretty high elevation as you can see here.

Back at home, I took a good look at it but didn’t see any issues. It seemed to run ok the couple times I used it. I assumed it was an elevation problem.

The first thing to fix was the fact that this saw cannot be adjusted for altitude – and I was using it at high altitude – 8,000′ MSL. It is advertised this way so this was not a surprise.

The carburetor is like any other chainsaw carburetor and had a high, low, and idle adjust screws. However; they did not have a screw head on them and could not be turned. Easy enough to fix!

I carefully removed them with needle nose pliers and filed a slot in each one. This slot was sized for a small screwdriver.

After adjusting the carb, it seemed to run ok.

Then, another trip to the mountains for more timber. It initially started ok but within an hour or two, I could barely start it. It would take 15 minutes of pulling on the rope, sweating, trying to get the choke/throttle set just perfectly, and huffing and puffing.

Eventually, I gave up and went home. Sure was a beautiful day though!!

At home, the pattern continued – it had become impossible to start – though it did occasionally fire and hint that it would like to run. So… the work began and I disassembled the saw.

The spark plug would spark and there was fuel. I even tried starting fluid. When it would not fire with starting fluid, I decided the problem was spark. It came with a spark plug brand that I had never seen (Torch?). A quick trip to the store and I had a brand new Champion spark plug in hand (like this one from Amazon). After installing it, the saw fired right up. Yep – a cheap spark plug that kind of worked but not very well. Ever since installing that new plug, the saw has fired right up. Crazy to think about a manufacturer wrecking a product like this and their reputation with a cheap spark plug.

I had one other issue. In the middle of a cutting session at home, it would start and run for about 5 seconds and then die. Finding this problem required a fair bit of disassembly but turned out to be one of the little fuel hoses connected to the primer bulb. It had fallen off the primer bulb fitting. After fixing that, the saw was back to operating properly.

I’ve now had the saw for a couple of months and have used it at least a few dozen times and three firewood harvesting trips in the mountains. It continues to work very well and starts easily. Hint: read what the owner’s manual suggest for a starting procedure – it does work.

The chain that came with the saw has some negative reviews so I purchased a quality Oregon chain (https://amzn.to/3BPuMaF) have at the ready. As of yet, I have not installed it as the original chain is working just fine. However; I do expect that it has a very limited life.

I’ve cut a pretty good quantity of Ponderosa Pine, Oak, and Juniper for woodturning bowls. This includes the obvious cross-grain cuts but also plenty of with the grain cuts (also called “noodling”).

At this stage, I would certainly buy the saw again for the price that I paid – along with a new plug. How long will it last? That remains to be seen.

(Visited 180 times, 1 visits today)

Related posts:

Husqvarna Chainsaw 450 Rancher sawdustHusqvarna Chainsaw – Making Sawdust! Default ThumbnailOnan Generator Repair Vans RV-4 Lycoming P-Mag Magneto Vacuum SlickA P-Mag for me! Default ThumbnailGrants Video

Comments

  1. Peter McDonald says

    October 27, 2024 at 5:21 am

    I am happy to hear that you are in the timber business!! Good work on that saw. I would never guess a spark plug could make that much difference.

    Reply
  2. Ronda says

    October 28, 2024 at 11:52 am

    Very good!!

    Reply

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Everything will be all right in the end, if it’s not all right, it’s not the end.

— Unknown

Popular Posts

  • Powermatic Model 90 Wood Lathe & VFD
  • Wood Turning on a Lathe
  • Chainsaw Review: Sportsman 20 in. 52cc
  • Cielo Grande Barbed Wire Fence Repair

Email Notification


 

Posts by Subject

3DPrinting Aircraft Airstrip Bible Bus bus boys Camping Cat Computers Cycling Development Electrical electronics Entertainment Environment Factory Five family FAQ Finances flying Food God Health Holiday Home Humor kayak Life Maintenance Nature Photography Review RV-3 RV-4 sailboat sailing self improvement Sewing solar Travel Video weather wood woodworking X-Country

Posts by Month

© Copyright © 2025 JDFinley.com · All Rights Reserved · Privacy Policy

Unauthorized use and/or duplication of this material without express and written permission from this site’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to JD Finley and JdFinley.com with appropriate and specific direction to the original content.